We have detected that you are using Internet Explorer 8 or older.
Please upgrade your browser to access our website.
Upgrading your browser will improve your browsing experience.

Upgrade Your Browser.

Terms of Use

General Statement: Our guiding principle is to do what is right for the customer and user of our products. We provide the same service that we would like to receive if the positions were reversed.

Introduction

Welcome to Micro Jig and thanks for taking the time to read this. This website and the mobile application are owned by Micro Jig, Inc. By using this website and/or our mobile application, you agree to these Terms of Use and our Privacy Policy. If you do not agree to these Terms of Use, please do not use this website and/or mobile application. At our discretion we reserve the right to modify, amplify, add, remove or otherwise modify portions of these Terms of Use at any time. We warmly suggest you to periodically check these Terms of Use for changes. Your continued use of MICROJIG.com following such changes means you accept them. We appreciate your patronage.

General Provisions

By visiting this site you agree that the Terms of Use shall be governed by and construed in accordance with the laws of the State of Florida, without giving effect to any principles of conflicts of law, and that any action at law or in equity arising out of or relating to these Terms of Use and the Privacy Policy shall be filed only in the state or federal courts located in Seminole County, Florida and you hereby consent and submit to the venue and personal jurisdiction of such courts for the purposes of such action. If any provision of these Terms of Use shall be unlawful, void or for any reason unenforceable, then that provision shall be deemed severable from these Terms of Use and shall not affect the validity and enforceability of any remaining provisions. These Terms of Use constitute the entire agreement between us relating to the subject matter herein and shall not be modified except in writing, signed by both parties. Those who choose to access our site do so on their own initiative and are responsible for compliance with local laws, if and to the extent local laws are applicable.

Purpose

We live to build, create, invent and purvey breakthrough tools and products that help you succeed at your passions and achieve your dreams. Our website is designed to help you understand the range of benefits of our products, provide entertainment and education in the use of our products, and make accessible and affordable the purchase of our products and other products we deem of exceptional ingenuity and craftsmanship.

Safety on the Internet

Please be aware that while you are using our web site or app, you could be directed to other sites that are beyond our control, including links from sponsors and content partners that may use our logo and/or name as part of a marketing agreement or any other agreement. You are responsible for implementing sufficient procedures to insure the accuracy of data input and output, and for maintaining a means external to this site for the reconstruction of any lost data. By using this website, or information linked from this site, you agree that Micro Jig does NOT guarantee or warrant that files available for downloading will be free of infection or viruses, worms, Trojan horses or other code that manifest contaminating or destructive properties and you assume total responsibility and risk for use of the service and the Internet. We attempt to thoroughly vet and test any downloads you download from MICROJIG.com for security and safety. Micro Jig does NOT make any express or implied warranties, representations or whatsoever (including without limitation warranties of title or non-infringement, or the implied warranties of merchantability or fitness for a particular purpose). Any merchandise, information or service provided through the Service or on the Internet in general, and Micro Jig shall not be liable for any cost or damage arising either directly or indirectly from any such transaction. Micro Jig does NOT warrant that the content or service will be uninterrupted or error-free or that defects in the content or service will be corrected. The site and related software are provided on an “as is, as available” basis.

Limitation of Liability

IN NO EVENT, INCLUDING, BUT NOT LIMITED TO, NEGLIGENCE, SHALL MICRO JIG BE LIABLE FOR ANY INDIRECT, INCIDENTAL, PUNITIVE OR OTHER CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT LIMITATION, LOST PROFITS) ARISING OUT OF OR IN RELATION TO THIS AGREEMENT OR YOUR USE OF OR YOUR INABILITY TO USE MICRO JIG CONTENT OR SERVICES. MICRO JIG ENTIRE LIABILITY AND YOUR EXCLUSIVE REMEDY SHALL BE AT MICRO JIG’S OPTION. EITHER RETURN OF THE FEES PAID FOR ANY CONTENT OR SERVICES, OR REPLACEMENT OF CONTENT AND SERVICES TO YOUR SATISFACTION.

User’s Duties

You will not use this app or web site to do anything unlawful, misleading, malicious, or discriminatory.

You grant us a non-exclusive, transferable, sub-licensable, royalty-free, worldwide license to use any IP content that you post on or in connection with Micro Jig (IP License). This IP License ends when you delete your IP content or your account unless your content has been shared with others, and they have not deleted it.
Micro Jig has the right to block or remove any inappropriate content at its sole discretion.

Registration and Account Security

The Micro Jig website may allow users to “log in.” Users shall provide their real names and information, and we need your help to keep it that way. Here are some commitments you make to us relating to registering and maintaining the security of your account:

Unless otherwise expressly authorized herein, you agree not to display, distribute, license, perform, publish, reproduce, duplicate, copy, create derivative works, modify, sell, resell, exploit, transfer or upload for any commercial purposes, any portion of the site. All rights not expressly granted to you above, including ownership and title, are reserved for the owner and not transferred or licensed to you.
Micro Jig has the right to use third party programs, servers, or databases to manage user log in and account information.

Restrictions

You agree not to copy, modify, create a derivative work of, reverse engineer, reverse assemble or otherwise attempt to discover any source code, sell, assign, sublicense, or otherwise transfer any right in the Software. Except as expressly authorized by Micro Jig, you agree as well not to modify, copy, frame, scrape, rent, lease, loan, sell, distribute or create derivative works based on the Service. In connection with your use of the Service you will not engage in or use any data mining, robots, scraping or similar data gathering or extraction methods. Any use of the Service or the Service Content other than as specifically authorized herein is strictly prohibited. The technology and software underlying the Service or distributed in connection therewith is the property of Micro Jig. Any rights not expressly granted herein are reserved by Micro Jig.

The Micro Jig name and logos are trademarks and service marks of Micro Jig, Inc. Other Micro Jig products and services names and logos used and displayed via the Service may be trademarks or service marks of their respective owners who may or may not endorse or be affiliated with or connected to Micro Jig. Nothing in this Terms of Service or the Service should be construed as granting, by implication, estoppels, or otherwise, any license or right to use any of Micro Jig trademarks displayed on the Service, without our prior written permission in each instance. All goodwill generated from the use of Micro Jig trademarks will inure to our exclusive benefit.

Some trademarks of or owned by Micro Jig include, but are not limited to: GRR-RIPPER®, ZEROPLAY®, Green GRR-RIP®, One-touch calibration®, Work Smarter®, “Work Safer. Work Smarter”®, 3D Pushblock®, MJ SPLITTER™, GRR-RIP BLOCK™, MICRODIAL™

Submission

Any information or materials you transmit, upload or otherwise submit to our site including, without limitation, comments, ratings, reviews, postings to chat, email messages or any other materials or any creative suggestions, ideas, notes, drawings, concepts or other information sent to us via our website and/or mobile application or other means of transmission or delivery, shall be collectively referred to as “Submissions”. If you transmit or otherwise deliver Submissions to us, you grant us a nonexclusive, royalty-free, perpetual, irrevocable (or the longest period permitted under law) license (with the right to sublicense and assign) to use, reproduce, modify, adapt, publish, translate, publicly perform and display, transmit, make, sell, create derivative works from and distribute such Submissions or incorporate such Submissions into other works in any form or medium and through any means or modes of distribution or technology now known or hereafter developed. However we will attempt to ask your permission first before attempting to distribute your materials. Also, you can request to have any materials taken down if you do not feel comfortable with the content distribution. You hereby agree and represent to us that you own or have been granted the necessary intellectual property and other rights in the Submissions (including, without limitation, a waiver of any applicable moral rights) to grant such license to us, that no such Submissions are, or shall be, subject to any obligation of confidence on the part of us and that we shall not be liable for any use or disclosure of any Submissions. Without limitation of the foregoing, we shall be entitled to unrestricted use of the Submissions for any purpose whatsoever, commercial or otherwise, without compensation to the provider of the Submissions.
Account Information

If you have an account on Micro Jig, you are entirely responsible for maintaining the confidentiality and security of your Account Information and for all activities that occur under your account (including, without limitation, credit card information, user names and passwords that may be required to use the site from time to time, etc.) and for restricting access to your computer or other devices. We reserve the right in our sole discretion to refuse access to the site or services provided through it, terminate accounts and usage rights, edit or remove content or Submissions (as defined above) and cancel orders or requests for materials made through the site.

Forums and Public Communication

With the term “Forum” this may include a chat area, message board, e-mail function, blog or any other function that allows you to transmit or submit material to our site for any purpose. Where the Forum is provided on a site other than our site, you will be bound by the terms of service and privacy policy of the site you have linked to. If you participate in any Forum within our site, you automatically agree that you will NOT: defame, abuse, harass or threaten others; advocate illegal activity or discuss illegal activities with the intent to commit them; make any hateful or racially offensive statements; post or distribute any vulgar, obscene, discourteous or indecent language or images; post or distribute any material that infringes and/or violates any right of a third party or any law; advertise or sell to, or solicit, others; use the Forum for commercial purposes of any kind; post material or make statements that do not generally pertain to the designated topic or theme of any chat room or bulletin board; post or distribute any software or other materials which contain a virus or other harmful component. We reserve the right to remove or edit content from any of our Forums at any time and for any reason but does not regularly review posted Submissions.

In addition, you must note and agree that you will not use a false email address, impersonate any person or entity or otherwise mislead others as to the source of origin of a Submission.

Any material transmitted, submitted or otherwise delivered to a Forum shall constitute a Submission and is hereby governed by the terms applicable to Submissions as described herein.

When participating in a Forum, never assume that people are whom they say they are, know what they say they know, or are affiliated with whom they say they are affiliated with in any chat room, message board or other user-generated content area. Information obtained in a Forum may not be reliable, and we are not responsible for the content or accuracy of any information.

We explicitly disclaim any responsibility for the accuracy, completeness, content or availability of information found on sites that link to or from our site. We cannot ensure that you will be satisfied with any products or services that you purchase from a third party site that links to or from our site or third party content on our sites. However we do take responsibility in guaranteeing satisfaction of our products if you obtain the product from an authorized dealer. We do not endorse any of the merchandise (if any) except as expressly provided, nor have we taken any steps to confirm the accuracy or reliability of any of the information contained in such third party sites or content. We do not make any representations or warranties as to the security of any information (including, without limitation, credit card and other personal information) you might be requested to give any third party, and you hereby irrevocably waive any claim against us with respect to such sites and third party content. We strongly encourage you to make whatever investigation you feel necessary or appropriate before proceeding with any online or offline transaction with any of these third parties.

Termination

These Terms of Use are effective until terminated by either party. Your access to our websites and/or mobile application may be terminated immediately without notice from us if, in our sole discretion, you fail to comply with any term of these Terms of Use. Upon such termination, you must cease use of our site and destroy all materials obtained from such site and all copies thereof, whether made under the terms of these Terms of Use or otherwise.

Notice and Procedure for Making Claims of Copyright Infringement

Pursuant to Title 17, United States Code, Section 512(c)(2), notifications of claimed copyright infringement should be sent to the Service Provider’s Designated Agent.

Notification must be submitted to the following address:

MICRO JIG, Inc.
P.O. Box 195607
Winter Springs, FL 32719

To be effective, the notification must be a written communication that includes the following:

Our Products

We’re human too. Please accept our apologies for any typos and errors in our descriptions. However, we do consider providing accurate, precise and useful information as a top priority of this website. Because we know that this information is critical for you to best use and enjoy our products SAFELY. Because you’re trusting us to provide the right information, we do not take this obligation lightly.

We attempt to be as accurate as possible regarding product descriptions, pricing and availability. However, unless specifically stated otherwise in writing on the Site, we do not warrant that product descriptions or other content of this Site are accurate, complete, reliable, current, or error-free. From time to time there may be information on the Site that contains typographical errors, inaccuracies, or omissions that may relate to product descriptions, pricing, and availability. We reserve the right to make changes in information about price, description, or availability without notice. We reserve the right, without prior notice, to limit the order quantity on any product and/or refuse service to any customer. We have made every effort to display as accurately as possible the colors of our products that appear on the Site; however, the actual color you will see will depend on many factors, including your computer, and we cannot guarantee that your computer will accurately display our colors. The inclusion of any products on this Site does not imply or warrant that these products will be available over the internet at any particular time.

Copyright

All content included on this Site, such as HTML code, scripts, text, graphics, logos, button icons, images, video, software created to provide mobile applications and audio (collectively, “Materials”), is our property or the property of our content suppliers and protected by United States and international copyright laws. All software used on this site is our property or the property of our service provider or its suppliers and protected by United States and international copyright laws.

Trademarks

Micro Jig retains all rights regarding its trademarks, trade names, brand names, logos and trade dress. These marks, names or trade dress, and all associated logos or images, are registered and/or common law trademarks, and are protected by U.S. and international laws and treaties. No license to the use of such marks, names or trade dress is granted to you under these terms and conditions or by your use of this Site. Your misuse of the trademarks, trade names, brand names, or trade dress displayed on this Site is strictly prohibited.

If you’re a authorized dealer, blogger, TV personality, or publication; that has a current business relationship with, you may use our trademarked material with our written permission. However, we may at anytime and at our disclosure deem the use inappropriate and will request any materials utilizing our trademarks to be removed, and demand that you cease and desist from using such material or marks.

License and Site Access

We grant you a limited license to access and make personal use of this Site. No right, title or interest in our Materials is conveyed to you. You may not download (other than page caching) or modify this Site, or any portion of it, except with our express written consent. This license does not include any resale or commercial use of this Site or its Materials; any collection and use of any product listings, descriptions, or prices; any derivative use of this Site or its Materials; any downloading or copying of account information for the benefit of another merchant; or any use of data mining, robots, or similar data gathering and extraction tools. This Site or any portion of this Site may not be reproduced, duplicated, copied, sold, resold, visited, published, displayed, or otherwise exploited for any commercial purpose without our express written consent. All rights not expressly granted are reserved by Micro Jig.

Special Notice: We have a no-tolerance policy regarding the use of our trademarks or names in metatags and/or hidden text. Specifically, the use of our trademarks or names in metatag keywords is trademark infringement, and the use of trademarks or names in page text, metatags, and/or hidden text for purposes of gaining higher rankings from search engines is unfair competition. You may not, without our express written consent, do any of the following: (a) link to any web page on this Site; (b) use any meta tags or any other “hidden text” utilizing our name or trademarks; or (c) frame, inline link or utilize other techniques to associate or juxtapose any of our trademarks, logos, or other Materials with advertisements and/or other information not originating from our Site.

However you may link to our site, but if we feel you’re inappropriately using our trademarks, links, etc. we will ask you to cease and desist and your right to link to our site will be terminated.

Any unauthorized use terminates your limited license, and we may revoke this limited license at any time for any or no reason. In the event of a violation of these Terms, Micro Jig reserves the right to seek all remedies available by law and in equity. Micro Jig retains the right at our sole discretion to deny access to anyone to this Site, at any time and for any or no reason, including, but not limited to, for violation of these Terms. You are also advised that Micro Jig will aggressively enforce its intellectual property rights to the fullest extent of the law, including the seeking of civil remedies and criminal prosecution.

Prohibited Use of this Site

General Statement: Be respectful. We respect your freedom of speech and opinions but we will not tolerate harassment and malicious attacks on our community members.

You shall not post, transmit, redistribute, upload, or promote any communications, content or materials that (a) are illegal, obscene, vulgar, profane, indecent, sexually explicit, threatening, harassing, abusive, hateful, racially or ethnically derogatory, defamatory, invasive of privacy or publicity rights, infringing of intellectual property rights, or otherwise injurious to third parties or objectionable; (b) consist of or contain software viruses, corrupted files, or any other similar software files, the intent of which is to damage or alter the operation of another’s computer; (c) contain political campaigning, unsolicited advertising, promotional materials, or other forms of solicitation to other users, individuals or entities; (d) contain chain letters, pyramid schemes, mass mailings, or any form of “spam”; (e) use a false email address, impersonates another person or entity, including our company and our employees or agents, or is otherwise misleading as to the origin of the content; (f) encourage conduct that would constitute a criminal offense; (g) give rise to civil liability; (h) otherwise violate any law; or (i) in doing so, amounts to any conduct that, in the judgment of Micro Jig restricts, impairs, interferes or inhibits any other user from using or enjoying the Site and/or our related services and products .

Other considerations:

Before using Micro Jig’s shopping cart, we encourage you to read our return policy. Our Product warranty is 1-year against manufacturer defects. Transfer of ownership happens once product is shipped from our fulfillment center. We have the right to cancel orders and refund funds at anytime prior to shipment. We have a right to refuse business to anyone shopping at our site. Once you receive your product, you are completely responsible for proper use, reading the instructions, and exercising prudent usage and reading and following any instructions on third-party powertools or machinery in the conjunction of use with our products.

Our site may provide information on other third party products not originating from Micro Jig. It is the user‘s duty to do their due diligence to ensure they are properly using their machinery/products in accordance to manufacturer suggested usage.

We may endorse other bloggers and personalities on this site but what they do and say does not make them a representative of company policies or correct practices – although we go to great lengths to ensure the use and show our product in proper use. We are not responsible for any damages caused by their incorrect usage or advice given. We will also share user reviews and third-party content – each are to be examined independently and do not reflect the policy of the parent company but are meant to be useful and informative and entertaining.

We may also link to third party authorized dealers to resell our product. You are subject to their terms and conditions if you purchase from them or visit their site. Our terms and conditions do not transfer to any third party sites.

By doing business with us, you’re agreeing to also do business indirectly with our partners (i.e. fulfillment center who will send the product, hosting company hosting the website and server, etc.).

We thank you for your business, friendship, and support. We appreciate you enduring all the legal-speak.