GRR-RIPPER Handle Bridge Kit
2X
Pack
GRR-RIPPER Handle Bridge KitGRR-RIPPER Handle Bridge Kit
GRR-RIPPER Handle Bridge Kit
+

Limited time only. Hurry while supplies last!
Use code at checkout:
What's Included:
FREE shipping on orders over $40 in the contiguous USA.

or buy separately

GRR-RIPPER

Handle Bridge Kit


Ships in 3-5 business days.
Use code at checkout:
Included in the box:
  • (2) Handle Bridge plates
  • Trailing Hook
  • Mounting Hardware

100% Satisfaction Guaranteed
If you're not 100% satisfied with your purchase, return it for FREE. Contact us if you have any questions.
Precision, Control, & Safety

More comfort. More control.

The Handle Bridge Kit’s unique arch design distributes downward pressure evenly. The slotted channels allow you to position the handle at any angle for a more comfortable grip, while maintaining an even pressure.

Handle Bridges are equipped with four ¼-20 threaded inserts to attach the Deflector/Connector accessory. The kit also includes a Trailing Hook, adding a solid heel to push the workpiece from the tail end.

Henry Wang, Microjig Founder

GRR-RIPPER Handle Bridge Kit

Even pressure across four points.

  • Attaches to the GRR-RIPPER® with included mounting hardware.
  • Distributes downward pressure evenly across all four points of contact.
  • The Handle can be set at an angle for a more comfortable grip.
GRR-RIPPER Handle Bridge Kit

Included trailing hook.

  • Trailing Hook assists GREEN GRR-RIP® by feeding workpiece from behind with a solid heel.
  • ¼-20 threaded inserts for attaching the Deflector/Connector accessory (sold separately).

GRR-RIPPER Handle Bridge Kit
GRR-RIPPER Handle Bridge Kit
GRR-RIPPER Handle Bridge Kit
GRR-RIPPER Handle Bridge Kit

GRR-RIPPER Handle Bridge Kit
GRR-RIPPER Handle Bridge Kit
GRR-RIPPER Handle Bridge Kit
GRR-RIPPER Handle Bridge Kit
GRR-RIPPER Handle Bridge Kit
GRR-RIPPER Handle Bridge Kit

Use it around your whole shop.

Over 30+ uses on table saws, router tables, jointers, and band saws.
GRR-RIPPER Handle Bridge Kit

Table Saws

The GRR-RIPPER was built for the table saw. It acts as a moving blade guard, shielding your hands from the saw blade through the entire cut. Right out of the box, the GRR-RIPPER can cut stock down to ¼” x ¼”. Because it provides 3 directions of control, your cuts will be cleaner and more precise.

GRR-RIPPER Handle Bridge Kit

Router Tables

The GRR-RIPPER provides incredible command over your workpiece on the router table. Whether you’re using the fence or freehand routing, its powerful grip controls stock and protects your hands from dangerous spinning bits.

GRR-RIPPER Handle Bridge Kit

Jointers

The GRR-RIPPER’s proprietary Green GRR-RIP material provides all the traction you need to properly flatten stock on the jointer. Because of its powerful grip, you can feed material over the cutter head without having to apply too much downward pressure.  The GRR-RIPPER makes proper face-jointing technique easy, and safe.

GRR-RIPPER Handle Bridge Kit

Band Saws

The GRR-RIPPER's legs and main body maintain a constant 90 degree angle. It can be used on its side which is ideal for resawing on bandsaws. The GRR-RIPPER glides along the table top and applies even pressure against the fence with your hands clear of the blade. Even pressure means less blade drift, resulting in smoother cuts.

Features.

GRR-RIPPER Handle Bridge Kit

GRR-RIPPER Handle Bridge KitGRR-RIPPER Handle Bridge KitGRR-RIPPER Handle Bridge Kit

Expand your GRR-RIPPER system.

GRR-RIPPER 1/8" Leg Accessory
GRR-RIPPER 1/8" Leg Accessory
GRR-RIPPER 1/8" Leg Accessory
GRR-RIPPER 1/8" Leg Accessory
GRR-RIPPER Gravity Heel Kit
GRR-RIPPER Gravity Heel Kit
GRR-RIPPER Gravity Heel Kit
GRR-RIPPER Gravity Heel Kit
GRR-RIPPER Upgrade Kit (For GR-100)
GRR-RIPPER Upgrade Kit (For GR-100)
GRR-RIPPER Upgrade Kit (For GR-100)
GRR-RIPPER Upgrade Kit (For GR-100)
GRR-RIPPER Deflector / Connector
GRR-RIPPER Deflector / Connector
GRR-RIPPER Deflector / Connector
GRR-RIPPER Deflector / Connector

Got questions?

No items found.

See the GRR-RIPPER system in action.

Specifications.

Included in the box
Parts
  • (2) Handle Bridge plates
  • Trailing Hook
  • Mounting Hardware
Parts
Parts
*Promo Product
Accessories Included
Weight
4.0oz
Package Dimensions
9.5" x 6.0" x 1.0"
Cutting Range (Table Saws)
Thread
Clamping Range
Clamping Pressure
Offsets
Kerf Range (Table Saw)
Angle Range
Calibration Range
Requirements
Compatibility

Compatible with all GRR-RIPPER 3D Pushblock models.

California Prop. 65
SKU

GRHB-010

UPC
815267010040
Country of Origin
Tariff Code
8466.20
MSRP
PROMO*

Customer Reviews.

Safety for every shop.

Your purchases help support Microjig's safety initiative to donate Grr-rippers to every public high school with a Career Technical Woodworking Program. Our objective is to raise the standards of safety for the next generation and beyond. Thank you. Work Safer. Work Smarter.

Learn More