GRR-RIPPER Upgrade Kit (For GR-100)
2X
Pack
GRR-RIPPER Upgrade Kit (For GR-100)GRR-RIPPER Upgrade Kit (For GR-100)
GRR-RIPPER Upgrade Kit (For GR-100)
+

Limited time only. Hurry while supplies last!
Use code at checkout:
What's Included:
FREE shipping on orders over $40 in the contiguous USA.

or buy separately

GRR-RIPPER

Upgrade Kit (For GR-100)


Ships in 3-5 business days.
Use code at checkout:
Included in the box:
  • Stabilizing Plate
  • Adjustable Spacer
  • Mounting Hardware

100% Satisfaction Guaranteed
If you're not 100% satisfied with your purchase, return it for FREE. Contact us if you have any questions.
Advanced precision, control, & safety

Turn your GRR-RIPPER into GRR-RIPPER Advanced.

The Upgrade Kit includes two accessories that turn your GR-100 into a GR-200.

Kit is made up of:

  • (1) Stabilizing Plate
  • (1) Adjustable Spacer
Henry Wang, Microjig Founder

GRR-RIPPER Upgrade Kit (For GR-100)

Three directions of force.

Three directions of force provide essential stability for superior precision, safety, and control.

  • Downward pressure stabilizes work piece on a flat surface.
  • Inward pressure against the fence virtually eliminates kickback.
  • Forward pressure feeds stock consistently through the cut to eliminate burning and blade marks.
GRR-RIPPER Upgrade Kit (For GR-100)

Virtually eliminates kickback on table saws.

Kickback occurs when the workpiece strays from the fence, and gets pinched between the saw blade and the fence. The rear teeth of the blade grab the workpiece, turning it into a dangerous projectile. The only way to avoid kickback is to maintain control of your workpiece through the entire cut.

The GRR-RIPPER® provides downward and inward pressure, keeping both sides of the cut parallel to the blade. This prevents the workpiece from straying from the rip fence, virtually eliminating kickback.

Rip without stopping and burning.

Using two GRR-RIPPERs allows you to feed long stock continuously without stopping, virtually eliminating burning and blade marks caused by inconsistent feed rate. Parts come off the saw ready to use with little to no additional sanding or planing.

GRR-RIPPER Upgrade Kit (For GR-100)
GRR-RIPPER Upgrade Kit (For GR-100)
GRR-RIPPER Upgrade Kit (For GR-100)
GRR-RIPPER Upgrade Kit (For GR-100)

GRR-RIPPER Upgrade Kit (For GR-100)
GRR-RIPPER Upgrade Kit (For GR-100)
GRR-RIPPER Upgrade Kit (For GR-100)
GRR-RIPPER Upgrade Kit (For GR-100)
GRR-RIPPER Upgrade Kit (For GR-100)
GRR-RIPPER Upgrade Kit (For GR-100)

Use it around your whole shop.

Over 30+ uses on table saws, router tables, jointers, and band saws.
GRR-RIPPER Upgrade Kit (For GR-100)

Table Saws

The GRR-RIPPER was built for the table saw. It acts as a moving blade guard, shielding your hands from the saw blade through the entire cut. Right out of the box, the GRR-RIPPER can cut stock down to ¼” x ¼”. Because it provides 3 directions of control, your cuts will be cleaner and more precise.

GRR-RIPPER Upgrade Kit (For GR-100)

Router Tables

The GRR-RIPPER provides incredible command over your workpiece on the router table. Whether you’re using the fence or freehand routing, its powerful grip controls stock and protects your hands from dangerous spinning bits.

GRR-RIPPER Upgrade Kit (For GR-100)

Jointers

The GRR-RIPPER’s proprietary Green GRR-RIP material provides all the traction you need to properly flatten stock on the jointer. Because of its powerful grip, you can feed material over the cutter head without having to apply too much downward pressure.  The GRR-RIPPER makes proper face-jointing technique easy, and safe.

GRR-RIPPER Upgrade Kit (For GR-100)

Band Saws

The GRR-RIPPER's legs and main body maintain a constant 90 degree angle. It can be used on its side which is ideal for resawing on bandsaws. The GRR-RIPPER glides along the table top and applies even pressure against the fence with your hands clear of the blade. Even pressure means less blade drift, resulting in smoother cuts.

Features.

GRR-RIPPER Upgrade Kit (For GR-100)

GRR-RIPPER Upgrade Kit (For GR-100)GRR-RIPPER Upgrade Kit (For GR-100)GRR-RIPPER Upgrade Kit (For GR-100)

Expand your GRR-RIPPER system.

GRR-RIPPER 1/8" Leg Accessory
GRR-RIPPER 1/8" Leg Accessory
GRR-RIPPER 1/8" Leg Accessory
GRR-RIPPER 1/8" Leg Accessory
GRR-RIPPER Gravity Heel Kit
GRR-RIPPER Gravity Heel Kit
GRR-RIPPER Gravity Heel Kit
GRR-RIPPER Gravity Heel Kit
GRR-RIPPER Handle Bridge Kit
GRR-RIPPER Handle Bridge Kit
GRR-RIPPER Handle Bridge Kit
GRR-RIPPER Handle Bridge Kit
GRR-RIPPER Deflector / Connector
GRR-RIPPER Deflector / Connector
GRR-RIPPER Deflector / Connector
GRR-RIPPER Deflector / Connector

Got questions?

How do I use the GRAK-404 Upgrade Kit for the GRR-RIPPER?

Here’s a short video showing many of the great uses for the GRAK-404 Upgrade Kit AKA the Stabilizing Plate and Adjustable Spacer.

See the GRR-RIPPER system in action.

Specifications.

Included in the box
Parts
  • Stabilizing Plate
  • Adjustable Spacer
  • Mounting Hardware
Parts
Parts
*Promo Product
Accessories Included
Weight
15.4oz
Package Dimensions
5.75" x 8.75" x 1.50"
Cutting Range (Table Saws)
Thread
Clamping Range
Clamping Pressure
Offsets
Kerf Range (Table Saw)
Angle Range
Calibration Range
Requirements
Compatibility

Compatible with GRR-RIPPER (GR-100) only.

California Prop. 65
SKU

GRAK-404

UPC
815267010033
Country of Origin
Tariff Code
8466.20
Patent #
MSRP
PROMO*

Customer Reviews.

Safety for every shop.

Your purchases help support Microjig's safety initiative to donate Grr-rippers to every public high school with a Career Technical Woodworking Program. Our objective is to raise the standards of safety for the next generation and beyond. Thank you. Work Safer. Work Smarter.

Learn More