ZeroPlay Guide Bar
The ZeroPlay Guide Bar is a “One-Touch Calibration” miter bar (9 ½” in length) that has two stacked half bars with opposing wedges that expand parallel evenly to fit the exact width of a standard miter slot for a perfect fit and smooth glide, even fits tricky Shopsmith™ or General’s miter slots.
Create perfectly square cross cut jigs WITHOUT any trial and error set-screw adjustment along the miter bar - use our One-Touch Calibration.
Easily square jig to the blade adjustment while securing through the top of the sled - Top Down Installation
Build small cut-off jig easy to carry and store, or build large jig with ZeroPlay Guide Bars in tandem with custom spacing
Replace worn and warped wood runners and aluminum bars that can be a hassle to calibrate
Retro-Fit your existing cross-cut jigs for improved precision
Accurately check alignment of saw blade to the miter slot with a dial-indicator (not included)
Build your own unique jig or jigs with included plan
ZeroPlay Stops serve as an anchor for your clamping devices within the miter slot – shop build clamp plan included
Build table saw coving fence with the ZeroPlay Stop
ZeroPlay Stops limit the travel distance for specialty jig
Because the ZeroPlay Guide Bar is a full profile miter bar that fits the exact width of the miter slot, you have no side-to-side play within the miter slot. The ZeroPlay Guide Bar System is for those who demand absolute accuracy and have zero tolerance for mistakes. Build better jigs in less time!