ZEROPLAY Ultimate Sled Kit


ZEROPLAY Ultimate Sled Kit
or buy separately
ZEROPLAY
Ultimate Sled Kit
Only while supplies last!
Included in the box:
- (2) Dovetail Track Clamp® AP
- (2) X-PAD™ Attachment
- (1) Miter Bar (Double Kit)
- (1) Dovetail Hardware Variety Pack
- (1) 1/4" Relief Bit
- (1) 14º x 1/2" Dovetail Bit
- Ultimate Sled Digital Project Plans
100% Satisfaction Guaranteed
- Priority Mail Express: No delays.
- Priority Mail: 1-2 day delay. No delays for local delivery.
- First-Class Package Service: 1-2 day delay.

Will it fit my table saw?
Build the last sled you'll ever need.
The MATCHFIT Dovetail Track system allows you to create your own tracks with just a router bit. It’s like an infinite supply of T-track without the cost of T-track. ZEROPLAY Miter Bars let you setup sleds faster than ever. Together these systems combine to give you unlimited configurations of sleds.

Create your own clamp tracks anywhere you can route.
Use the Relief Bit and Dovetail Router Bit to create your own Dovetail Tracks. It’s an entire system designed to give you all the functionality of t-track at a fraction of the cost.

Make precision sleds fast
The Miter Bar secures to the sled from the top, allowing you to square it to the blade without taking it off the table. Miter Bars adjust to perfectly fit the entire width of your miter slot.

360º of adjustability
The unique grid layout of dovetail grooves allows you to set your fence at any angle, and lock it in place with the included MatchFit Dovetail Hardware. No matter the angle of your cut, the ZeroPlay Miter Bar keeps the sled running parallel to the blade at all times.

Clamp round stock with ease.
Turn the X-PAD™ 90º to clamp round and oblong-profile stock with a single clamp.
The do-anything table saw tools.
Secure with 360º of freedom, under, over, and sideways.

The ultimate crosscut sled.
When you combine the versatility of the MATCHFIT System with ZEROPLAY Miter Bars, you get the ULTIMATE Table Saw Sled. Get creative! Add attachments and make any imaginable cut with ease.

Build any jig you can imagine.
Dovetail Hardware moves along the tracks below the surface, securing material without getting in the way. Create a variety of jigs and tighten down anywhere you can route a groove.

Make custom Stop and hold-downs
The Miter Stop locks into T-Style miter slots using the included T-bolt and wing nut to securely hold your shop-built fixtures and hold downs on your machines.
Use it around your whole shop.
Features.
ZEROPLAY Ultimate Sled Kit

MATCHFIT Dovetail Clamp (2-pack)

MATCHFIT Dovetail Clamp (2-pack)

MATCHFIT 1.5" Dovetail Track Screw

MATCHFIT 1.5" Dovetail Track Screw

MATCHFIT Setup Gauge

MATCHFIT Setup Gauge

MATCHFIT 1" Dovetail Track Screw

MATCHFIT 1" Dovetail Track Screw
What people are saying.
Brilliantly done
Can't wait to build
Great crosscut design
Great plans
Great design
Got questions?
Tablesaw Crosscut Sled Featuring Microjig Matchfit Dovetail System
How to Build the Ultimate Table Saw Sled
Microjig Matchfit Inspired Crosscut Sled pt 1
The Most Epic 360 Table Saw Sled
Specifications.
Models
Parts
- (2) Dovetail Track Clamp® AP
- (2) X-PAD™ Attachment
- (1) Miter Bar (Double Kit)
- (1) Dovetail Hardware Variety Pack
- (1) 1/4" Relief Bit
- (1) 14º x 1/2" Dovetail Bit
- Ultimate Sled Digital Project Plans (delivered via email)
Parts
- (2) Miter Bars
- (2) Miter Stops
ZEROPLAY Miter Bars and Stops will fit ANY standard (3/4” x 3/8”) T-Track miter slot that measures between 0.73" and 0.79" wide and at least 5/16" deep.
Compatible miter tracks include but not exclusive to: SawStop, Bosch 4100, Delta Unisaw, Powermatic, Rigid, Dewalt, and General 350 Tracks.
(Not compatible with table saws with 'Tabs' cast into the top of the miter slot or 5/8" miter slots i.e. Ryobi or Craftsman)
ZEROPLAY Miter Bars and Stops will fit ANY standard (3/4” x 3/8”) T-Track miter slot that measures between 0.73" and 0.79" wide and at least 5/16" deep.
Compatible miter tracks include but not exclusive to: SawStop, Bosch 4100, Delta Unisaw, Powermatic, Rigid, Dewalt, and General 350 Tracks.
(Not compatible with table saws with 'Tabs' cast into the top of the miter slot or 5/8" miter slots i.e. Ryobi or Craftsman)
ZP-1050
ZP-1000
DVC-1177K2
ZP750-B2S2
Designed in the USA
Made in Taiwan
Designed in the USA
Made in Taiwan
Designed in the USA. Made in Taiwan.
Customer Reviews.
Ad Blocker Detected
Please disable ad blocker for full website functionality.