MATCHFIT 1.5" Dovetail Track Screw
2X
Pack
MATCHFIT 1.5" Dovetail Track ScrewMATCHFIT 1.5" Dovetail Track Screw
MATCHFIT 1.5" Dovetail Track Screw
+
New & Improved

Limited time only. Hurry while supplies last!
Use code at checkout:
What's Included:
FREE shipping on orders over $40 in the contiguous USA.

or buy separately

★ NEW & IMPROVED
New & Improved

MATCHFIT

1.5" Dovetail Track Hardware® Screw 2.0 (6-pack)

Ships in 3-5 business days.
Use code at checkout:
Features:
  • Stronger, more durable material.
  • Now includes (2) additional hardware pieces (6 total pieces)
  • Compatible with standard ½” x 14º dovetail groove.
  • Includes (6)10-32 x 1-1/2” (38.1mm) Dovetail Track Screws and six (6) #10-32 wing knobs
  • Securely clamp parts up to 1-1/4”(32mm) thick.
100% Satisfaction Guaranteed
If you're not 100% satisfied with your purchase, return it for FREE. Contact us if you have any questions.
ONE PROFILE, ENDLESS POSSIBILITIES

Dovetail track hardware for jigs and fixtures.

With any 1/2" x 14º dovetail router bit, you create your own Dovetail Tracks anywhere you wish, eliminating the need to buy expensive T-track. Microjig’s Dovetail Hardware is part of our MatchFit system designed to provide all the function of T-track at a fraction of the cost. Wherever you can mill a groove, you can put Dovetail Hardware.

Henry Wang, Microjig Founder

The idea of using the Dovetail profile as a track came about while founder and inventor Henry Wang was trying to attach a tall fence to his table saw. Standard c-clamps got in the way, and the only solution, it seemed, was to install T-track to secure the fence. Convinced there was a better way, Henry repurposed the classic dovetail profile as a quick, reliable means of securing jigs and fixtures without the cost of cumbersome aluminum tracks.

MATCHFIT 1.5" Dovetail Track Screw

The most versatile profile ever.

Create a variety of sleds, jigs and fixtures with hold downs and stops that can move freely and lock down where needed anywhere you can mill the dovetail groove.

Included in the box:
  • (6) #10-32 x 1-1/2” (38.1mm) Track Screws
  • (6) #10-32 Wing Knobs

MATCHFIT 1.5" Dovetail Track Screw

MATCHFIT 1.5" Dovetail Track Screw
MATCHFIT 1.5" Dovetail Track Screw
MATCHFIT 1.5" Dovetail Track Screw
MATCHFIT 1.5" Dovetail Track Screw

Make every inch of your workshop more functional.

MATCHFIT 1.5" Dovetail Track Screw
Shop-Built jigs are quick and easy.
MATCHFIT 1.5" Dovetail Track Screw
Make all your tools more efficient and effective.
MATCHFIT 1.5" Dovetail Track Screw
Applications all over your shop.
MATCHFIT 1.5" Dovetail Track Screw
MATCHFIT 1.5" Dovetail Track Screw
MATCHFIT 1.5" Dovetail Track Screw

Use it around your whole shop.

Over 30+ uses on table saws, router tables, jointers, and band saws.
MATCHFIT 1.5" Dovetail Track Screw

Router Tables

The Grr-ripper provides incredible command over your workpiece on the router table. Whether you’re using the fence or freehand routing, its powerful grip controls stock and protects your hands from dangerous spinning bits.

MATCHFIT 1.5" Dovetail Track Screw

Table Saws

The Grr-ripper was built for the table saw. It acts as a moving blade guard, shielding your hands from the saw blade through the entire cut. Right out of the box, the Grr-ripper can cut stock down to ¼” x ¼”. Because it provides three directions of control, your cuts will be cleaner and more precise.

MATCHFIT 1.5" Dovetail Track Screw

Jointers

The Grr-ripper’s proprietary Green Grr-rip material provides all the traction you need to properly flatten stock on the jointer. Because of its powerful grip, you can feed material over the cutter head without having to apply too much downward pressure.  The Grr-ripper makes proper face-jointing technique easy and safe.

MATCHFIT 1.5" Dovetail Track Screw

Band Saws

The Grr-ripper's legs and main body maintain a constant 90-degree angle. It can be used on its side, which is ideal for resawing on band saws. The Grr-ripper glides along the table top and applies even pressure against the fence with your hands clear of the blade. Even pressure means less blade drift, resulting in smoother cuts.

Features.

MATCHFIT 1.5" Dovetail Track Screw

MATCHFIT 1.5" Dovetail Track ScrewMATCHFIT 1.5" Dovetail Track ScrewMATCHFIT 1.5" Dovetail Track Screw

Expand your MATCHFIT system.

MATCHFIT Dovetail Router Bit (1/2"-14°)
MATCHFIT Dovetail Router Bit (1/2"-14°)
MATCHFIT Dovetail Router Bit (1/2"-14°)
MATCHFIT Dovetail Router Bit (1/2"-14°)
MATCHFIT Dovetail Clamp (2-pack)
MATCHFIT Dovetail Clamp (2-pack)
MATCHFIT Dovetail Clamp (2-pack)
MATCHFIT Dovetail Clamp (2-pack)
MATCHFIT Dovetail Clamp Pro
MATCHFIT Dovetail Clamp Pro
MATCHFIT Dovetail Clamp Pro
MATCHFIT Dovetail Clamp Pro
ZEROPLAY 360 Sled Kit
ZEROPLAY 360 Sled Kit
ZEROPLAY 360 Sled Kit
ZEROPLAY 360 Sled Kit

Got questions?

Do I need the MATCHFIT Dovetail Router Bit in order to use Dovetail Clamps and Dovetail Hardware?

Only if you value your time.  Standard dovetail router bits cut to a sharp point at the top of the groove, which requires a decent amount of sanding after the track is routed.  Our router bit incorporates a 1/16” roundover to automatically smooth out the top of the track in a single pass.  Less time sanding means more time building.

Why dovetail tracks as opposed to T-slot?

When tightening anything inside of a t-slot, the pressure is applied perpendicular to the material surface, which may weaken the integrity of the track.  If a t-slot is cut into plywood, all of the force is concentrated on the small flange at the bottom, causing the plywood to delaminate. With a dovetail profile, the clamping force is distributed evenly along the entire wall of the track for an overall stronger hold.

Will MATCHFIT Dovetail Clamps and Dovetail Hardware fit into my Festool track?

The clamps will not, the hardware will, but that’s kind of missing the point.  The MATCHFIT system was designed to be compatible with a standard router bit profile, so that users wouldn’t actually need metal tracks.  However, some users have been known to file or grind about .005” off of the wide part of the clamp’s elbow and use them in their Festool track.  Our advice is to use Festool clamps with Festool tracks, and use Dovetail Clamps for everything else.

Why is the Dovetail Hardware getting stuck?

When you tighten the Dovetail Hardware into a plywood or MDF groove, the 14 degree dovetail profile wedges the plastic head of the hardware in place in the groove.

This "locks" the hardware in place so it cannot move side to side within the dovetail groove. So you can wedge a Track Screw in place, loosen the knob, and turn a cam clamp to secure stock in ways that T-Track hardware cannot.

When you are done, just press the Track Screw or Track Nut back down into the groove to 'snap' it loose and slide it to your next task.

Can I use MDF for Matchfit tables and jigs?

Good quality plywood or MDF work just fine for the MatchFit Dovetail System. Because the clamp pressure is normally directly over the clamp head in the groove, the groove is supported and the board does not tear out. There is a video showing the process here: https://youtu.be/oHtOey0-97U

See the MATCHFIT system in action.

Specifications.

Included in the box
Parts
  • (6) #10-32 x 1-1/2” (38.1mm) Track Screws
  • (6) #10-32 Wing Knobs
Parts
  • (6) #10-32 x 1" (25.4mm) Track Screws
  • (6) #10-32 Round Knobs
  • (6) Shoulder Washers
Parts
  • (6) #10-32 Dovetail Track Nuts
  • (6) #10-32 x 3/4" Panhead Screws
  • (6) #10 Steel Washers
*Promo Product
Accessories Included
Weight
0.20
0.20
0.20
Package Dimensions
5.1" x 7.3" x 1.6"
5.1" x 7.3" x 1.6"
5.1" x 7.3" x 1.6"
Cutting Range (Table Saws)
Thread
#10-32
#10-32
#10-32
Clamping Range
Clamping Pressure
Offsets
Kerf Range (Table Saw)
Angle Range
Calibration Range
Requirements

Any standard 1/2" x 14° Dovetail Router Bit

Any standard 1/2" x 14° Dovetail Router Bit

Any standard 1/2" x 14° Dovetail Router Bit

Compatibility
SKU

DV-HL1.5K6

DV-HL1.0K6

DV-HL0.0K6

UPC
815267011375
815267011368
815267011351
Country of Origin
Tariff Code
Patent #
MSRP
PROMO*

Customer Reviews.

Our Story

Family-Owned & Operated

Established 2001.

For beginners and pros alike, Microjig is reimagining an ancient craft and changing the way you work with wood.

Build your projects with more protection, more precision, and more passion. Work safer. Work smarter.

Designed in the USA by Woodworkers
Protecting Users in 37 Countries and Counting
1%  Donated toNon-Profits andCharities

It all started in a garage workshop...

Henry was working on an intricate project and was challenged with cutting thin strips on a table saw. His frustration with traditional methods sparked one of the most innovative woodworking tools to come out in decades.

After countless hours and prototypes, the Grr-ripper was born. Henry has continued to innovate, and Microjig now offers multiple unique product lines all over the world.

Wood magazine
WOOD Innovate Award
FitFinder 1/2 Gauge
WOOD Innovate Award
FitFinder Lock Miter Bit
Rated 5/5
Grr-ripper 3D Pushblock
Rated 4.8/5
MatchFit Dovetail Clamp
Best for Table Saw Safety
Grr-ripper 3D Pushblock
#1 Best Overall Push Block
Grr-rip Block Smart Pushblock
Best High-end Push Block
Grr-ripper Advanced
Best Multifunctional Push Block
Grr-ripper Complete
Award Winner
MatchFit Dovetail Clamp
Award Winner
MatchFit Dovetail Clamp AP
Award Winner
FitFinder 1/2 Gauge
Award Winner
FitFinder Lock Miter Bit
Award Winner
MatchFit Dovetail Clamp AP
Award Winner
MatchFit Ratchet Clamp AP
Registered Small Business
Minority-Owned Business
Section 889 Certified

Safety for every shop.

Your purchases help support Microjig's safety initiative to donate Grr-rippers to every public high school with a Career Technical Woodworking Program. Our objective is to raise the standards of safety for the next generation and beyond. Thank you. Work Safer. Work Smarter.

Learn More