Get FREE shipping in the US when you spend $25 or more!
ZEROPLAY 360 Sled Kit
DYNAMIC TABLE SAW SLED

The last table saw sled you'll ever need.

The ZEROPLAY 360 Sled Kit combines the ease and accuracy of ZEROPLAY Miter Bars with the versatility of MATCHFIT Dovetail Hardware. The kit includes (1) ZEROPLAY Miter Bar and (4) sets of 1-½” MATCHFIT Dovetail Track Screws - build the last sled you’ll ever need.

Henry Wang, Microjig Founder

The defining feature and flaw of aftermarket miter bars are one in the same - set screws. Frustrated with the difficulty of fitting miter bars with set screws, Founder and inventor, Henry Wang,set out to change it. He conceived a method of adjustment based on opposing wedges, that adjusted the entire bar evenly in a single motion. With its One-Touch Calibration and top-down installation, the age-old struggles of sled making had finally been solved.

How it works.

ZEROPLAY 360 Sled Kit

The do-anything table saw sled.

  • Includes ZEROPLAY Miter Bar, MATCHFIT Dovetail Hardware, and step by step jig plans.
  • Compatible with MATCHFIT Dovetail Clamps.
ZEROPLAY 360 Sled Kit

ZEROPLAY 360 Sled Kit
ZEROPLAY 360 Sled Kit
ZEROPLAY 360 Sled Kit
ZEROPLAY 360 Sled Kit

Building the 360 Sled is fast and easy with the step-by-step instructions provided.

ZEROPLAY 360 Sled Kit

Install ZEROPLAY Miter Bar and square sled with the blade.

ZEROPLAY 360 Sled Kit

The unique grid layout of dovetail tracks allows the fence 360 degrees of rotation.

ZEROPLAY 360 Sled Kit

No matter the angle of your cut the Miter Bars keep the sled moving parallel to the blade at all times.

ZEROPLAY 360 Sled Kit
ZEROPLAY 360 Sled Kit
ZEROPLAY 360 Sled Kit

Use it around your whole shop.

Over 30+ uses on table saws, router tables, jointers, and band saws.
ZEROPLAY 360 Sled Kit

Table Saws

The GRR-RIPPER was built for the table saw. It acts as a moving blade guard, shielding your hands from the saw blade through the entire cut. Right out of the box, the GRR-RIPPER can cut stock down to ¼” x ¼”. Because it provides 3 directions of control, your cuts will be cleaner and more precise.

ZEROPLAY 360 Sled Kit

Router Tables

The GRR-RIPPER provides incredible command over your workpiece on the router table. Whether you’re using the fence or freehand routing, its powerful grip controls stock and protects your hands from dangerous spinning bits.

ZEROPLAY 360 Sled Kit

Jointers

The GRR-RIPPER’s proprietary Green GRR-RIP material provides all the traction you need to properly flatten stock on the jointer. Because of its powerful grip, you can feed material over the cutter head without having to apply too much downward pressure.  The GRR-RIPPER makes proper face-jointing technique easy, and safe.

ZEROPLAY 360 Sled Kit

Band Saws

The GRR-RIPPER's legs and main body maintain a constant 90 degree angle. It can be used on its side which is ideal for resawing on bandsaws. The GRR-RIPPER glides along the table top and applies even pressure against the fence with your hands clear of the blade. Even pressure means less blade drift, resulting in smoother cuts.

Features.

ZEROPLAY 360 Sled Kit

ZEROPLAY 360 Sled KitZEROPLAY 360 Sled KitZEROPLAY 360 Sled Kit

Specifications.

Included in the box
Parts
  • (1) Miter Bar
  • (4) 1.5" Dovetail Track Screws
Parts
  • Miter Bar
Accessories Included
Weight
6oz
3.25oz
Package Dimensions
6.5" x 12.0" x 0.5"
Cutting Range (Table Saws)
Thread
Offsets
Kerf Range (Table Saw)
Cut Angle
Angle Range
Calibration Range
Benefits
Requirements

Table Saw

Compatibility

ZEROPLAY Miter Bars and Stops will fit ANY standard (3/4” x 3/8”) T-Track miter slot that measures between 0.73" and 0.79" wide and at least 5/16" deep.

Compatible miter tracks include but not exclusive to: SawStop, Bosch 4100, Delta Unisaw, Powermatic, Rigid, Dewalt, and General 350 Tracks.

(Not compatible with table saws with 'Tabs' cast into the top of the miter slot or 5/8" miter slots i.e. Ryobi or Craftsman)

ZEROPLAY Miter Bars and Stops will fit ANY standard (3/4” x 3/8”) T-Track miter slot that measures between 0.73" and 0.79" wide and at least 5/16" deep.

Compatible miter tracks include but not exclusive to: SawStop, Bosch 4100, Delta Unisaw, Powermatic, Rigid, Dewalt, and General 350 Tracks.

(Not compatible with table saws with 'Tabs' cast into the top of the miter slot or 5/8" miter slots i.e. Ryobi or Craftsman)

SKU
DV-360ZPB1
ZP9-B1
UPC
815267010897
815267010309
Tariff Code
3907.20
3907.20
MSRP
Included in the box
Parts
  • (1) Miter Bar
  • (4) 1.5" Dovetail Track Screws
Parts
  • Miter Bar
Parts
  • (2) Miter Bars
  • (2) Miter Stops
Accessories Included
Weight
6oz
3.25oz
5.3oz
Package Dimensions
6.5" x 12.0" x 0.5"
8.25" x 12.0" x 1.0"
Cutting Range (Table Saws)
Thread
Offsets
Kerf Range (Table Saw)
Cut Angle
Angle Range
Calibration Range
Benefits
Requirements

Table Saw

Table Saw

Compatibility

ZEROPLAY Miter Bars and Stops will fit ANY standard (3/4” x 3/8”) T-Track miter slot that measures between 0.73" and 0.79" wide and at least 5/16" deep.

Compatible miter tracks include but not exclusive to: SawStop, Bosch 4100, Delta Unisaw, Powermatic, Rigid, Dewalt, and General 350 Tracks.

(Not compatible with table saws with 'Tabs' cast into the top of the miter slot or 5/8" miter slots i.e. Ryobi or Craftsman)

ZEROPLAY Miter Bars and Stops will fit ANY standard (3/4” x 3/8”) T-Track miter slot that measures between 0.73" and 0.79" wide and at least 5/16" deep.

Compatible miter tracks include but not exclusive to: SawStop, Bosch 4100, Delta Unisaw, Powermatic, Rigid, Dewalt, and General 350 Tracks.

(Not compatible with table saws with 'Tabs' cast into the top of the miter slot or 5/8" miter slots i.e. Ryobi or Craftsman)

ZEROPLAY Miter Bars and Stops will fit ANY standard (3/4” x 3/8”) T-Track miter slot that measures between 0.73" and 0.79" wide and at least 5/16" deep.

Compatible miter tracks include but not exclusive to: SawStop, Bosch 4100, Delta Unisaw, Powermatic, Rigid, Dewalt, and General 350 Tracks.

(Not compatible with table saws with 'Tabs' cast into the top of the miter slot or 5/8" miter slots i.e. Ryobi or Craftsman)

SKU
DV-360ZPB1
ZP9-B1
ZP9-B2S2
UPC
815267010897
815267010309
815267010293
Tariff Code
3907.20
3907.20
3907.20
MSRP
Included in the box
Parts
  • (1) Miter Bar
  • (4) 1.5" Dovetail Track Screws
Parts
  • Miter Bar
Parts
  • (2) Miter Bars
  • (2) Miter Stops
Accessories Included
Weight
6oz
3.25oz
5.3oz
Package Dimensions
6.5" x 12.0" x 0.5"
8.25" x 12.0" x 1.0"
Cutting Range (Table Saws)
Thread
Offsets
Kerf Range (Table Saw)
Cut Angle
Angle Range
Calibration Range
Benefits
Requirements

Table Saw

Table Saw

Compatibility

ZEROPLAY Miter Bars and Stops will fit ANY standard (3/4” x 3/8”) T-Track miter slot that measures between 0.73" and 0.79" wide and at least 5/16" deep.

Compatible miter tracks include but not exclusive to: SawStop, Bosch 4100, Delta Unisaw, Powermatic, Rigid, Dewalt, and General 350 Tracks.

(Not compatible with table saws with 'Tabs' cast into the top of the miter slot or 5/8" miter slots i.e. Ryobi or Craftsman)

ZEROPLAY Miter Bars and Stops will fit ANY standard (3/4” x 3/8”) T-Track miter slot that measures between 0.73" and 0.79" wide and at least 5/16" deep.

Compatible miter tracks include but not exclusive to: SawStop, Bosch 4100, Delta Unisaw, Powermatic, Rigid, Dewalt, and General 350 Tracks.

(Not compatible with table saws with 'Tabs' cast into the top of the miter slot or 5/8" miter slots i.e. Ryobi or Craftsman)

ZEROPLAY Miter Bars and Stops will fit ANY standard (3/4” x 3/8”) T-Track miter slot that measures between 0.73" and 0.79" wide and at least 5/16" deep.

Compatible miter tracks include but not exclusive to: SawStop, Bosch 4100, Delta Unisaw, Powermatic, Rigid, Dewalt, and General 350 Tracks.

(Not compatible with table saws with 'Tabs' cast into the top of the miter slot or 5/8" miter slots i.e. Ryobi or Craftsman)

SKU
DV-360ZPB1
ZP9-B1
ZP9-B2S2
UPC
815267010897
815267010309
815267010293
Tariff Code
3907.20
3907.20
3907.20
MSRP

Accessories and more.

Build table saw sleds fast.

Got questions?

Does the ZEROPLAY Miter Bar work with Shopsmith® miter tracks?

It depends. The miter slots vary in width from model to model. Measure your miter slot to ensure that it is at least .730" wide"

Will the ZEROPLAY work on my miter track?

The ZEROPLAY Miter Bar System works with both ‘T’ & ‘U’ shaped miter slots. The adjustable range is between 0.73″ – 0.785″ this means the width of the miter slot in which the Miter Bar will lay must be between these ranges. In detail, the very bottom part of a ‘T’ shaped miter slot must be within this specific range as well as a ‘U’ slot. Secondly, the thickness of the ZEROPLAY miter bar is 5/16″. Specifically, this means that the miter slot must be a minimum of 5/16” in depth. Moreover, considering a ‘T’ shape miter slot the area below the hinges must be 5/16″ or greater in depth, and considering a ‘U’ shaped miter slot the depth must be 5/16″ or greater. The ZEROPLAY Stop only works with ‘T’ shaped miter slots. All the same physical parameters apply to this product as the Miter Bar system; except of course only working on ‘T’ shaped miter slots.

Do the ZEROPLAY 360 Sled Kit or single miter bar kit include the ZEROPLAY Miter Stop?

No.  The Miter Stop is included with the double miter bar pack, and is also available individually.

Does the ZEROPLAY 360 Sled Kit include the sled?

No.  The kit is designed to allow users to build their own sled, to their own specifications.  Don’t worry, you can do it!  We provide detailed, easy-to-follow instructions for building the sled of your dreams.  Believe in yourself.

I’m having trouble adjusting my miter bars - either too tight or too loose. Any tips?

If your miter bar fits well but becomes too tight when installed on a sled, you may have tightened the panhead screws too much. Overtightening those screws can cause the bars to compress and expand outward.  Try putting a single strip of paper on the inside of one of the miter slots when adjusting the miter bars’ width.  This should offset the compression that occurs during installation.

My table saw has tabs at the top of the miter slot. Will ZEROPLAY Miter Bars work on my saw?

No. The tabs will get in the way.  Refer to the compatibility diagram here:

See it in action.

More Videos

Customer Reviews.

Safety for every shop.

Your purchases help support MICROJIG's safety initiative to donate GRR-RIPPERs to every public high school with a Career Technical Woodworking Program. Our objective is to raise the standards of safety for the next generation and beyond. Thank you. Work Safer. Work Smarter.

Learn More