MATCHFIT Dovetail Clamp AP
2X
Pack
MATCHFIT Dovetail Clamp APMATCHFIT Dovetail Clamp AP
MATCHFIT Dovetail Clamp AP
+
48 Hours Only!

Buy a Dovetail Clamp AP and get a FREE Dovetail Router Bit!

Limited time only. Hurry while supplies last!
$30.00
$60.00
Use code at checkout:
What's Included:
FREE shipping on orders over $40 in the contiguous USA.

or buy separately

48 Hours Only!

MATCHFIT

Dovetail Track Clamp® AP
$30.00 $60.00

Ships in 3-5 business days.
Buy a Dovetail Clamp AP and get a FREE Dovetail Router Bit!
Use code at checkout:
  • Larger more versatile clamp allows more capacity for clamping larger items.
  • Perfect for clamping corners, dowels, and odd shapes.
  • Very strong and can clamp those tricky angles.
  • Easily build additional jigs, sleds, fences, workbenches, drill press tables by routing tracks with the MatchFit dovetail profile.
100% Satisfaction Guaranteed
If you're not 100% satisfied with your purchase, return it for FREE. Contact us if you have any questions.
Best New Woodworking Tool
Anti-Pivot Technology

The ultimate track clamp.

Create your own clamp tracks anywhere you can route a dovetail groove. Enjoy the same, limitless functionality as the standard Dovetail Clamps with three added benefits:

  1. Anti-Pivot technology keeps the clamp arm in place to make repetitive tasks faster.
  2. Included X-PAD™ applies force in two directions and helps you secure material with fewer clamps.
  3. Increased clamping range (to 8.5").
Henry Wang, Microjig Founder

The idea for the Dovetail Clamp AP came when Founder and Inventor, Henry Wang, was using the first generation of Dovetail Clamps on the drill press for a process that required constant re-adjustment. The clamp arm would pivot and drop while swapping between workpieces, adding time and frustration to the project. The Anti-pivot coil spring solved the problem and proved to make repetitive processes faster and easier.

MATCHFIT Dovetail Clamp AP

Work faster with a clamp arm that won't drop.

  • The Anti-Pivot Coil Spring prevents the clamp arm from pivoting and dropping when switching workpieces in repetitive processes. Save time and work faster without having to reset your clamp height for every part.
  • Use any standard 1/2"–14º dovetail router bit to route your own tracks virtually anywhere. Clamp without limits, and never buy expensive T-track again.
MATCHFIT Dovetail Clamp AP

Clamp in two directions with a single clamp.

  • The included X-PAD™ simultaneously applies hold-down and in-line pressure as the clamp tightens. The combined forces keep your workpieces flat and eliminate the need for two or more different clamps.
  • The V-groove profile gives you two points of contact to clamp round or oblong stock with ease.

Build jigs like never before.

The MATCHFIT dovetail track system allows you to create your own tracks with just a router bit. It’s like an infinite supply of T-track without the cost of T-track.

MATCHFIT Dovetail Clamp AP
Create your own clamp tracks anywhere you can route.

Simply route a groove anywhere you need using a 1/2”–14º dovetail router bit.

MATCHFIT Dovetail Clamp AP
Secure material with ZERO interference.

The Dovetail Clamp AP slides below the surface, so you can secure material without the clamp getting in the way.

MATCHFIT Dovetail Clamp AP
Use with a spacer to secure material from a distance.

A spacer provides in-line pressure—leaving the top of the material unobstructed for sanding, flattening, template routing or CNC work.

MATCHFIT Dovetail Clamp AP
Clamp round stock with ease.

Turn the X-PAD™ 90º to clamp round and oblong-profile stock with a single clamp.

Unmatched versatility.

MATCHFIT Dovetail Clamp AP
Larger 8.5" clamping capacity.
MATCHFIT Dovetail Clamp AP
Reverse the arm and clamp in two directions.
MATCHFIT Dovetail Clamp AP
Secure material with no interference.
MATCHFIT Dovetail Clamp AP
MATCHFIT Dovetail Clamp AP
MATCHFIT Dovetail Clamp AP

Use it around your whole shop.

Over 30+ uses on table saws, router tables, jointers, and band saws.
MATCHFIT Dovetail Clamp AP

Table Saws

The GRR-RIPPER was built for the table saw. It acts as a moving blade guard, shielding your hands from the saw blade through the entire cut. Right out of the box, the GRR-RIPPER can cut stock down to ¼” x ¼”. Because it provides 3 directions of control, your cuts will be cleaner and more precise.

MATCHFIT Dovetail Clamp AP

Router Tables

The GRR-RIPPER provides incredible command over your workpiece on the router table. Whether you’re using the fence or freehand routing, its powerful grip controls stock and protects your hands from dangerous spinning bits.

MATCHFIT Dovetail Clamp AP

Jointers

The GRR-RIPPER’s proprietary Green GRR-RIP material provides all the traction you need to properly flatten stock on the jointer. Because of its powerful grip, you can feed material over the cutter head without having to apply too much downward pressure.  The GRR-RIPPER makes proper face-jointing technique easy, and safe.

MATCHFIT Dovetail Clamp AP

Band Saws

The GRR-RIPPER's legs and main body maintain a constant 90 degree angle. It can be used on its side which is ideal for resawing on bandsaws. The GRR-RIPPER glides along the table top and applies even pressure against the fence with your hands clear of the blade. Even pressure means less blade drift, resulting in smoother cuts.

Features.

MATCHFIT Dovetail Clamp AP

MATCHFIT Dovetail Clamp APMATCHFIT Dovetail Clamp APMATCHFIT Dovetail Clamp AP

Expand your MATCHFIT system.

MATCHFIT 1/4" Relief Bit
MATCHFIT 1/4" Relief Bit
MATCHFIT 1/4" Relief Bit
MATCHFIT 1/4" Relief Bit
MATCHFIT Dovetail Hardware Variety Pack
MATCHFIT Dovetail Hardware Variety Pack
MATCHFIT Dovetail Hardware Variety Pack
MATCHFIT Dovetail Hardware Variety Pack
MATCHFIT Jig Handle
MATCHFIT Jig Handle
MATCHFIT Jig Handle
MATCHFIT Jig Handle
ZEROPLAY Miter Bars (Double Kit)
ZEROPLAY Miter Bars (Double Kit)
ZEROPLAY Miter Bars (Double Kit)
ZEROPLAY Miter Bars (Double Kit)

Got questions?

Can I use MDF for Matchfit tables and jigs?

Good quality plywood or MDF work just fine for the MatchFit Dovetail System. Because the clamp pressure is normally directly over the clamp head in the groove, the groove is supported and the board does not tear out. There is a video showing the process here: https://youtu.be/oHtOey0-97U

See the MATCHFIT system in action.

Specifications.

Included in the box
Parts
  • (1) Dovetail Track Clamp® AP
  • (1) X-PAD™ Attachment
Parts
  • (2) Dovetail Clamps
*Promo Product
Accessories Included
Weight
1.1lbs
1.6lbs
2.2lbs
Package Dimensions
7.8" x 11.9" x 1.6"
7.75” x 11.5” x 1”
Cutting Range (Table Saws)
8.5" (clamping)
5-3/8" (clamping)
Thread
Clamping Range
8.5" (clamping)
5-3/8" (clamping)
Clamping Pressure
595 lbs
595 lbs
595 lbs
Offsets
Kerf Range (Table Saw)
8.5" (clamping)
5-3/8" (clamping)
Angle Range
8.5" (clamping)
5-3/8" (clamping)
Calibration Range
8.5" (clamping)
5-3/8" (clamping)
Requirements

Any standard 14°-1/2" Dovetail Router Bit

Any standard 14°-1/2" Dovetail Router Bit

Any standard 14°-1/2" Dovetail Router Bit

Compatibility
SKU

DVC-850AP

DVC-538K2

DVC-1177K2

UPC
815267010903
815267010712
815267010842
Country of Origin

Designed in the USA

Made in Taiwan

Designed in the USA

Made in Taiwan

Designed in the USA

Made in Taiwan

Tariff Code
Patent #

10,099,398

D846365

10,099,398

D846365

MSRP
PROMO*

Customer Reviews.

Safety for every shop.

Your purchases help support Microjig's safety initiative to donate Grr-rippers to every public high school with a Career Technical Woodworking Program. Our objective is to raise the standards of safety for the next generation and beyond. Thank you. Work Safer. Work Smarter.

Learn More