Ultimate Router System
or buy separately
MicroJig
100% Satisfaction Guaranteed
- Priority Mail Express: No delays.
- Priority Mail: 1-2 day delay. No delays for local delivery.
- First-Class Package Service: 1-2 day delay.
SHAPER CAPABILITY. ROUTER-TABLE FOOTPRINT.
The Ultimate Router System pairs the Sauter OFL3.0 Pivoting Router lift with JessEm's Mast-R-Fence III — thermally stabilized maple Fences faces, the same warp-proof wood used in Gibson guitar necks — a dead-flat phenolic top, and a vibration-damping steel stand. Engineered together, it holds its zero through every season, for decades. Set it up once, forget maintenance, and rout like the table isn't even a variable. Only at microjig.com.
Microjig Founder and inventor, Henry Wang, started out in his garage workshop in the late 90s. Faced with the challenge of cutting thin strips on a table saw, he sought to create a solution to cut small parts safely, accurately, and consistently. After countless engineering hours and dozens of prototypes, the Grr-ripper® pushblock was born.
Three directions of force.
Three directions of force provide essential stability for superior precision, safety, and control.
- Downward pressure stabilizes work piece on a flat surface.
- Inward pressure against the fence virtually eliminates kickback.
- Forward pressure feeds stock consistently through the cut to eliminate burning and blade marks.
Cut a reversed dovetail groove in one part
A single pass routes the reversed dovetail groove — the standard dovetail profile, flipped upside down. MicroJig's patented Radius Flair at the top of the cutter leaves smooth cut edges with virtually no tear out, so the groove comes off the router clean and ready to fit.
The Grr-ripper+™ provides downward and inward pressure, keeping both sides of the cut parallel to the blade. This prevents the workpiece from straying from the rip fence, virtually eliminating kickback.
Create your own clamp tracks.
With MatchFit, you're not confined to pre-set clamp positions. Carve out your custom dovetail tracks on any wooden surface, enhancing your hold-down capabilities where you need them most. The Dovetail Track System gives you all the functionality of T-track, in less time and at a fraction of the cost.
Seamless dovetail integration: All MatchFit clamps slide into any 1/2" x 14º dovetail groove, transforming your setup into a unified clamping haven for unmatched efficiency.
Precision made simple.
Designed for easy installation.
Set your angle. Start creating.
One kit. Ready to route.
Set for your next cut.
Precision at every angle.
Take control of every cut with precise angle adjustment from -5° to +50°. The OFL3.0 lets you position your router exactly where you need it, making it easier to achieve clean, consistent results across a wide range of angled routing applications. Whether you're creating bevels, grooves, splines, or other specialty cuts, you get the control and repeatability your projects demand.
Go beyond straight cuts.
Your router table can do much more than straight 90° cuts. With the OFL3.0, simply pivot the router to the angle you need and unlock new possibilities for your everyday router bits. Create angled chamfers, matching spline cuts, drawer pulls, and other specialty profiles without investing in and industrial tilting shaper.
Make every angle possible.
Give your router table the flexibility to tackle projects from a whole new perspective. The OFL3.0 pivots from -5° to +50°, allowing you to dial in the angle required for your project with precision. From subtle bevels to more demanding angled cuts, you can expand what your existing router bits can accomplish—all with one versatile system.
Use it around your whole shop.
Features.
Ultimate Router System
Frequently Bought Together
MATCHFIT Dovetail Clamp (2-pack)
MATCHFIT Dovetail Clamp (2-pack)
MATCHFIT 1/4" Relief Bit
MATCHFIT 1/4" Relief Bit
ZEROPLAY 360 Sled Kit
ZEROPLAY 360 Sled Kit
MATCHFIT Dovetail Track Nut
MATCHFIT Dovetail Track Nut
What people are saying.
Ingenious.
Woodworking's SAFEST Push Block Just Got Better
Great for long stock.
I still have all my fingers.
GRR-RIPPER Super Fan
Got questions?
Does it do everything a normal router lift does?
Yes. The OFL3.0 performs every function of a standard premium lift — fast, accurate height adjustment with secure locking and 3.94" (100mm) of travel. Then it does the thing no standard lift can: pivot the bit up to 50°.
Is a router motor included?
Yes. The lift comes as a complete system — a 2 HP variable-speed router motor running 3,500 to 30,000 RPM, with 1/4" and 1/2" collets and the wrenches to use them.
How do I set an angle?
Snap-in presets lock in the angles you use most — 15°, 22.5°, 30°, and 45°. For everything else across the –5° to +50° range, the vernier scale dials in any angle quickly and accurately.
How do bit changes work when the lift is tilted?
The lift travels forward and back to keep the bit centered in the throat opening at any angle, so bit changes and adjustments stay just as easy as on a standard lift. Every adjustment — tilt, travel, height — is 100% tool-free.
Do I need special bits?
No — that's the point. Tilting multiplies the bits you already own: straight bits cut chamfers and angled grooves, profile bits produce new shapes at every angle, and slot cutters make spline joints at the exact angle of your work.
What are the three throat plates for?
They're magnetic, and they keep the opening matched to the work — swap between straight and tilted operations in seconds. Set flat with the lift, they turn your table into a true precision milling surface.
What about dust collection?
The under-mounted dust shield beneath the lift, along with the dust post on the Mast-R-Fence, combine to capture dust at the source.
Why is this only available from MicroJig?
MicroJig is the exclusive US distributor of Sauter's pivoting router lift — precision German engineering, available in the US only at microjig.com and through this page.
Sauter Router video
Specifications.
Parts
- Sauter OFL3.0 Pivoting Router Lift
- JessEm Mast-R-Fence II
- JessEm Mast-R-Po
- JessEm Heavy Duty Leg Set
- Dovetail Tenon Bit
router lift comes with a Swiss made two horsepower router included. The package is has 3 throat plates, collets and wrenches you need to use it along with a very effective undermounted dust shield.
Parts
Parts
router lift comes with a Swiss made two horsepower router included. The package is has 3 throat plates, collets and wrenches you need to use it along with a very effective undermounted dust shield.
Complete system, you supply the bits.
Compatible Tabletops — lift plate 9-1/4" × 11-3/4" × 3/8":
• Harvey: 27" × 23-1/4" Cast Iron Router Table (RT-685), Rebate
• Infinity Tools: Plycore Router Table Top (RTT-002), Rebate
• Peachtree: Fulton Router Table Plates (3084, 3046, 3085, 3047), Rebate
• Woodpeckers: Solid Phenolic Router Table 27" × 43" (RT2743-PH-23), Rebate
• Woodpeckers: Solid Phenolic Router Table 24" × 32" (RT2432-PH-23), Rebate
• Woodpeckers: Premium Router Table PRP-4 (PRP-4-HD420SP), Rebate
• Woodpeckers: Premium Router Table Package PRP-3 (PRP-3-GROUP), Rebate
• Rockler: High Pressure Laminate Router Table Top (46924), Rebate
• Rockler: SawStop Cast Iron Router Table Top 24" × 32" (53196), Rebate
• Rockler: SawStop Cast Iron Router Table Top 16" × 30" (55499), Rebate
• Kreg: Precision Router Table Top (PRS1025), Levelers (PRS3034)
• Kreg: Precision Router Table Top System (PRS1045), Levelers (PRS3034)
• Incra: Router Table Tops (RT2432CM, RT2436OS & RT2743OS), Rebate
MJ-OFL3.0
Customer Reviews.
Our Story
Family-Owned & Operated
Established 2001.
For beginners and pros alike, Microjig is reimagining an ancient craft and changing the way you work with wood.
Build your projects with more protection, more precision, and more passion. Work safer. Work smarter.
Designed in the USA by Woodworkers
Protecting Users in 37 Countries and Counting
1% Donated toNon-Profits andCharities
It all started in a garage workshop...
Henry was working on an intricate project and was challenged with cutting thin strips on a table saw. His frustration with traditional methods sparked one of the most innovative woodworking tools to come out in decades.
After countless hours and prototypes, the Grr-ripper was born. Henry has continued to innovate, and Microjig now offers multiple unique product lines all over the world.
WOOD Innovate Award
WOOD Innovate Award
Rated 5/5
Rated 4.8/5
Best for Table Saw Safety
#1 Best Overall Push Block
Best High-end Push Block
Best Multifunctional Push Block
Award Winner
Award Winner
