GRR-RIPPER ReSaw Riser Accessory
or buy separately
GRR-RIPPER
100% Satisfaction Guaranteed
- Priority Mail Express: No delays.
- Priority Mail: 1-2 day delay. No delays for local delivery.
- First-Class Package Service: 1-2 day delay.
TALLER STOCK. TOTAL CONTROL.
The ReSaw Riser Kit extends your GRR-RIPPER's cut capacity from 2" (50mm) to a full 3-7/8" (98mm) — two riser blocks and the hardware to outfit a pair. The nylon shoulder washer drops into the Balance Support groove for on-in-seconds attachment, flips between two heights, and pairs with the Stabilizer Plate to control narrow stock. The riser block you'd build in the shop — already made for you.
Microjig Founder and inventor, Henry Wang, started out in his garage workshop in the late 90s. Faced with the challenge of cutting thin strips on a table saw, he sought to create a solution to cut small parts safely, accurately, and consistently. After countless engineering hours and dozens of prototypes, the Grr-ripper® pushblock was born.
Three directions of force.
Three directions of force provide essential stability for superior precision, safety, and control.
- Downward pressure stabilizes work piece on a flat surface.
- Inward pressure against the fence virtually eliminates kickback.
- Forward pressure feeds stock consistently through the cut to eliminate burning and blade marks.
Cut a reversed dovetail groove in one part
A single pass routes the reversed dovetail groove — the standard dovetail profile, flipped upside down. MicroJig's patented Radius Flair at the top of the cutter leaves smooth cut edges with virtually no tear out, so the groove comes off the router clean and ready to fit.
The Grr-ripper+™ provides downward and inward pressure, keeping both sides of the cut parallel to the blade. This prevents the workpiece from straying from the rip fence, virtually eliminating kickback.
Create your own clamp tracks.
With MatchFit, you're not confined to pre-set clamp positions. Carve out your custom dovetail tracks on any wooden surface, enhancing your hold-down capabilities where you need them most. The Dovetail Track System gives you all the functionality of T-track, in less time and at a fraction of the cost.
Seamless dovetail integration: All MatchFit clamps slide into any 1/2" x 14º dovetail groove, transforming your setup into a unified clamping haven for unmatched efficiency.
Work Tall Stock with Confidence
One kit.Ready to route.
Set for yournext cut.
Unlock more reach.
Expand your GRR-RIPPER's reach to safely control taller stock. The ReSaw Riser Accessory provides added support and stability for demanding resawing and advanced woodworking applications.
Add height. Gain capability.
Designed to provide additional support when working with taller workpieces, the ReSaw Riser helps maintain proper pressure and alignment throughout the cut. The added height improves control during resawing operations and other demanding applications where traditional push tools often fall short.
Bigger cuts. Better control.
When your projects demand greater cutting capacity, the GRR-RIPPER ReSaw Riser Accessory helps you maintain the same confidence and control you've come to expect from the GRR-RIPPER system.
Use it around your whole shop.
Features.
GRR-RIPPER ReSaw Riser Accessory
Frequently Bought Together
Tapering Jig
Tapering Jig
GRR-RIP BLOCK Smart Pushblock
GRR-RIP BLOCK Smart Pushblock
FITFINDER 1/2 Gauge
FITFINDER 1/2 Gauge
FITFINDER 1/2 Gauge Upgrade Kit
FITFINDER 1/2 Gauge Upgrade Kit
What people are saying.
Ingenious.
Great for long stock.
Woodworking's SAFEST Push Block Just Got Better
I still have all my fingers.
GRR-RIPPER Super Fan
Got questions?
Will the GRR-RIPPER trip the sensor on my Sawstop?
No. The plastic material will not trigger the safety mechanism on Sawstop saws.
Where can I buy the GRR-RIPPER in Australia?
Please take a look at our Find a Retailer page and scroll to the bottom and click “International Retailers” to see a list of our Australian dealers near you. Many outside retailers also offer shipping to Australia.
How does the SafeRip cursor work?
Once your rip fence is set to the desired cut, simply adjust the Center Leg of your GRR-RIPPER so that the measurement you are cutting is NOT underneath the orange cursor on the GRR-RIPPER that is facing you.
For example, if your rip fence is set to 1-1/8” (29mm), the 1-1/8” (29mm) mark on the back of the GRR-RIPPER should be to the right of the orange cursor.
The cursor automatically accounts for the blade width and works on both side of the Center Leg, so when making a 2-1/2” (64mm) rip cut, the 2-1/2” (64mm) mark should be to the left of the orange cursor and the blade will pass safely to the left of the Center Leg.
Why plastic?
All GRR-RIPPER accessories are made of specially formulated high-impact plastics for good reason. It maintains its shape and rigidity, but also absorbs force if it makes contact with the blade. In other words, it won’t shatter or break your wrist.
Does the ReSaw Riser work on my other machines?
Yes, you can use the ReSaw Riser Blocks at the router table as well as the Table Saw. Just be sure to use an auxiliary tall fence as needed.
Can I use the ReSaw Riser with the blade guard on my table saw?
The GRR-RIPPER passes over the blade so there can’t be anything in the way. Don’t worry, the GRR-RIPPER is your moving blade guard.
What if the Riser lifts my GRR-RIPPER above the Rip Fence?
The GRR-RIPPER always needs to guide along the rip fence at the table saw. An auxiliary tall fence like our 3-In-1 Jig can be used to extend the rip fence height.
ReSaw Riser Kit Video
Specifications.
Parts
The kit includes two riser blocks, four Dovetail T-Bolts, four shoulder washers, and four round knobs.
Parts
Parts
GRR-RIPPER
Adds support for taller stock / resawing with the GRR-RIPPER system (per marketing copy)
GRRR-125
Taiwan
Customer Reviews.
Our Story
Family-Owned & Operated
Established 2001.
For beginners and pros alike, Microjig is reimagining an ancient craft and changing the way you work with wood.
Build your projects with more protection, more precision, and more passion. Work safer. Work smarter.
Designed in the USA by Woodworkers
Protecting Users in 37 Countries and Counting
1% Donated toNon-Profits andCharities
It all started in a garage workshop...
Henry was working on an intricate project and was challenged with cutting thin strips on a table saw. His frustration with traditional methods sparked one of the most innovative woodworking tools to come out in decades.
After countless hours and prototypes, the Grr-ripper was born. Henry has continued to innovate, and Microjig now offers multiple unique product lines all over the world.
WOOD Innovate Award
WOOD Innovate Award
Rated 5/5
Rated 4.8/5
Best for Table Saw Safety
#1 Best Overall Push Block
Best High-end Push Block
Best Multifunctional Push Block
Award Winner
Award Winner
