BLADECLEAN Blade and Bit Cleaning System
2X
Pack
BLADECLEAN Blade and Bit Cleaning SystemBLADECLEAN Blade and Bit Cleaning System
BLADECLEAN Blade and Bit Cleaning System
+
LIMITED TIME ONLY

Buy a BladeClean and get FREE Arbor Shims!

Limited time only. Hurry while supplies last!
Use code at checkout:
What's Included:
FREE shipping on orders over $40 in the contiguous USA.

or buy separately

LIMITED TIME ONLY

BLADECLEAN

Blade and Bit Cleaning System


Ships in 3-5 business days.
Buy a BladeClean and get FREE Arbor Shims!
Use code at checkout:
Included in the box:
  • BLADECLEAN cleaning well
  • Magnetic handle
  • Wire brush
  • Al₂O₃ cleaning discs
  • Rotary tool mandrel

100% Satisfaction Guaranteed
If you're not 100% satisfied with your purchase, return it for FREE. Contact us if you have any questions.
2022 Holiday Gift Guide ($50-$100 Gifts)
All-in-one blade and bit cleaning

The fastest way to clean your saw blades and router bits.

The BLADECLEAN Blade and Bit Cleaning System is the quickest, safest, and most enjoyable way to clean your saw blades and router bits. This all-in-one kit is compatible with:

  • Saw blades (circular) - up to 12" in diameter.
  • Router bits - 1/4”, 1/2”, 6mm, 8mm, and 12mm shank sizes.

Not compatible with shaper cutters.

Henry Wang, Microjig Founder

BLADECLEAN Blade and Bit Cleaning System

Clean blades = clean cuts.

Dirty blades and bits put stress on your machine, generate more heat, and are often mistaken as dull. This is when blades are unnecessarily sent off for sharpening while, more often than not, all they need is a quick cleaning.

BLADECLEAN Blade and Bit Cleaning System

Less time cleaning, more time building.

Cleaning saw blades can be tedious and time consuming. The BLADECLEAN system shortens the entire job to just a few minutes. Quickly clean an entire side of your saw blade in a single motion, and without harsh chemicals.

The BLADECLEAN features seals to prevent evaporation of the cleaning fluid, but is not water tight. It should be kept upright during use and storage to prevent spilling

BLADECLEAN Blade and Bit Cleaning System
BLADECLEAN Blade and Bit Cleaning System
BLADECLEAN Blade and Bit Cleaning System
BLADECLEAN Blade and Bit Cleaning System

BLADECLEAN Features

BLADECLEAN Blade and Bit Cleaning System
No bare hand contact with cutting edges or chemicals.

The magnetic handle attaches to your saw blade, so your skin doesn't come into contact with harsh chemicals or sharp cutting edges.

BLADECLEAN Blade and Bit Cleaning System
Industrial grade aluminium-oxide cleaning pads.

No more wire brushing! The scouring pad is uniquely suited to reach every nook and cranny of your saw blade at once. Clean an entire side of the blade in a single motion.

BLADECLEAN Blade and Bit Cleaning System
Clean a variety of router bit sizes at once.

The router bit holder lets you soak and clean up to five bits in record time using the included scouring discs. Compatible with 1/4”, 1/2”, 6mm, 8mm, and 12mm shank sizes.

BLADECLEAN Blade and Bit Cleaning System
BLADECLEAN Blade and Bit Cleaning System
BLADECLEAN Blade and Bit Cleaning System

Use it around your whole shop.

Over 30+ uses on table saws, router tables, jointers, and band saws.
BLADECLEAN Blade and Bit Cleaning System

Table Saws

The GRR-RIPPER was built for the table saw. It acts as a moving blade guard, shielding your hands from the saw blade through the entire cut. Right out of the box, the GRR-RIPPER can cut stock down to ¼” x ¼”. Because it provides 3 directions of control, your cuts will be cleaner and more precise.

BLADECLEAN Blade and Bit Cleaning System

Router Tables

The GRR-RIPPER provides incredible command over your workpiece on the router table. Whether you’re using the fence or freehand routing, its powerful grip controls stock and protects your hands from dangerous spinning bits.

BLADECLEAN Blade and Bit Cleaning System

Jointers

The GRR-RIPPER’s proprietary Green GRR-RIP material provides all the traction you need to properly flatten stock on the jointer. Because of its powerful grip, you can feed material over the cutter head without having to apply too much downward pressure.  The GRR-RIPPER makes proper face-jointing technique easy, and safe.

BLADECLEAN Blade and Bit Cleaning System

Band Saws

The GRR-RIPPER's legs and main body maintain a constant 90 degree angle. It can be used on its side which is ideal for resawing on bandsaws. The GRR-RIPPER glides along the table top and applies even pressure against the fence with your hands clear of the blade. Even pressure means less blade drift, resulting in smoother cuts.

Features.

BLADECLEAN Blade and Bit Cleaning System

BLADECLEAN Blade and Bit Cleaning SystemBLADECLEAN Blade and Bit Cleaning SystemBLADECLEAN Blade and Bit Cleaning System

Expand your BLADECLEAN system.

GRR-RIPPER Complete
GRR-RIPPER Complete
GRR-RIPPER Complete
GRR-RIPPER Complete
BLADEMATCH Arbor Shims (6-pack)
BLADEMATCH Arbor Shims (6-pack)
BLADEMATCH Arbor Shims (6-pack)
BLADEMATCH Arbor Shims (6-pack)
MATCHFIT Dovetail Clamp Pro
MATCHFIT Dovetail Clamp Pro
MATCHFIT Dovetail Clamp Pro
MATCHFIT Dovetail Clamp Pro
GRR-RIPPER 3D Pushblock
GRR-RIPPER 3D Pushblock
GRR-RIPPER 3D Pushblock
GRR-RIPPER 3D Pushblock

Got questions?

What solvent are you using?

Use your preferred cleaner. Can be Simple Green, Fabuloso, Pinesol, or whatever you like. No need for harsh solvents and chemicals.

Will it work with a 12" blade?

Yes, the cleaning well is designed to work with blades from 7" up to 12"

How long will the BLADECLEAN Pad last?

It depends on how often you clean your blades, but our testing shows that the average woodworker will get several hundred cleanings before needing to replace the pad.

How often do you change the cleaning solution?

The dirt from cleaning tends to sink down through the pad, so it does not affect the cleaning process. When the solution is difficult to see through, it should be replaced.

What is the right speed for the aluminum oxide cleaning discs?

8,000 to 10,000 rpm provides the best balance between cleaning speed and disc life.

Can I clean router bits with bearings?

Yes, but you should remove the bearing before submerging the bit in cleaning solution. Many common household cleaners contain degreaser and can affect the bearing’s performance.

See the BLADECLEAN system in action.

Specifications.

Included in the box
Parts
  • BLADECLEAN cleaning well
  • Magnetic handle
  • Wire brush
  • Al₂O₃ cleaning discs
  • Rotary tool mandrel
Parts
Parts
*Promo Product
Accessories Included
Weight
6.1lbs
Package Dimensions
16" x 16.14" x 8"
Cutting Range (Table Saws)
Thread
Clamping Range
Clamping Pressure
Offsets
Kerf Range (Table Saw)
Angle Range
Calibration Range
Requirements
Compatibility

Saw blades up to 12" in diameter.

Router bits with 1/4”, 1/2”, 6mm, 8mm, or 12mm shank sizes.

California Prop. 65
SKU

BC-81012

UPC
815267011313
Country of Origin

Designed in USA

Made in Taiwan

Tariff Code
Patent #
MSRP
PROMO*

Customer Reviews.

Safety for every shop.

Your purchases help support Microjig's safety initiative to donate Grr-rippers to every public high school with a Career Technical Woodworking Program. Our objective is to raise the standards of safety for the next generation and beyond. Thank you. Work Safer. Work Smarter.

Learn More