The MICROJIG Holiday Gift Guide 2026
Shopping for a woodworker is tricky. They already own the big tools, and they have opinions about everything. What they don't always buy for themselves is the stuff that makes every cut safer, faster, and more accurate. That's where we come in.
This year's guide includes the biggest lineup of new MICROJIG tools we've ever released, from the all-new GRR-RIPPER AIR pushblocks to the 25th Anniversary FitFinder Ultra Kit. We've sorted everything by budget so you can find the right gift in a couple of minutes.
Order by December 17 for delivery by Christmas.
Stocking Stuffers Under $30

For: The new woodworker (or the one who keeps borrowing yours)
A compact, grippy pushblock that keeps hands away from the blade and controls the workpiece through the cut. The precision legs handle strips as thin as 5/16" (8mm).

MATCHFIT Pop Stops (6-pack) · $18.99
For: The repeat-cut perfectionist
Pop Stops set anywhere in a MATCHFIT dovetail groove, stand up when needed, and fold flush into the groove when covered. They work on fences, sleds, jigs, and tables.

NEW: GRR-RIPPER ReSaw Riser Accessory · $19.99
For: The maker who resaws their own stock
Two riser blocks with dovetail hardware give the GRR-RIPPER extra height for resaw work. It's an easy add-on for anyone who already has one.

MATCHFIT Dovetail Hardware Variety Pack (8-pack) · $19.99
For: The jig builder
Track screws in three lengths plus track nuts let them build jigs and fixtures that slide and lock down anywhere they can route a 1/2" x 14° dovetail groove.

NEW: GRR-RIP ReNew Accessory · $29.99
For: The GRR-RIPPER owner whose pushblock has seen a lot of sawdust
ReNew comes with a cleaning pad, clamp plates, and a steel mounting plate for a spray bottle, so their GRR-RIPPER keeps the grip it had on day one. (Spray bottle and alcohol not included.)

MATCHFIT Dovetail Router Bit (1/2" x 14°) · from $29.99
For: The MATCHFIT fan who wants to put dovetail tracks anywhere
Routes smooth 1/2" x 14° dovetail tracks in a single pass, with built-in roundovers so there's less sanding. It's the bit behind every MATCHFIT clamp, Pop Stop, and hardware setup. Available in 1/2", 1/4", 12mm, and 8mm shanks.
Gifts That Wow: Under $100

NEW: GRR-RIPPER 100AIR 3D Pushblock · $59.99
For: Anyone with a table saw, router table, or jointer
The next generation of the pushblock that started it all. It has everything from the classic GRR-RIPPER 100, now with X-AIR legs and SafeRip cursors built in. If you only buy one thing from this list, make it this one.
%20(2).jpg)
NEW: GRR-RIPPER 200AIR 3D Pushblock · $89.99
For: The woodworker who wants more control on every cut
Everything in the 100AIR, plus the Stabilizing Plate, Adjustable Spacer, and the extra mounting hardware.
FITFINDER 1/2 Gauge + Upgrade Kit · $69.98
For: Anyone who's tired of doing fraction math
The 1/2 Gauge finds the exact center of any material up to 3" thick, so they can set fences and bit heights with no measuring. Add the Upgrade Kit for four more tips (Inside, Outside, Marking Wheel, and Up) that transfer that center to saws, router tables, drill presses, and bandsaws. Each is $34.99.

NEW: FitFinder Wave Reversible Glue Joint Bit · from $79.99
For: The furniture and tabletop maker
The only reversible glue joint bit with the patented FitFinder Center Platform. It produces self-aligning wave glue-ups with 60% more glue surface, set up right the first time. Available in 3/4" (1/4" shank) and 1 1/4" (1/2" shank).

MATCHFIT Dado Stop Pro · $64.99
For: The joinery nerd
Exact-width crosscut dados for lap joints, bridle joints, and inlays, with no dado blade, shims, or test cuts. Made in the USA.

ZEROPLAY Miter Bar Set · $42.99
For: The sled and jig builder
Two miter bars and two miter stops with zero slop in the slot. It's the foundation for a dead-square crosscut sled.
For the Serious Maker: $100 and Up

NEW: GRR-RIPPER 300AIR 3D Pushblock · $129.99
For: The woodworker who wants the whole system
Everything in the 200AIR, plus four GRR-RIPPER accessories: the 1/8" Leg, Gravity Heel, Handle Bridge, and Deflector/Connector. It's the most complete GRR-RIPPER in one box.

BLADECLEAN Blade and Bit Cleaning System · $119.99
For: The one who's been meaning to clean those blades
The quickest, safest way to clean saw blades up to 12" and router bits. Clean tooling cuts better and lasts longer.

MATCHFIT Grid Router Guide Kit · $119.99
For: The shop organizer building a do-it-all work surface
Route MATCHFIT dovetail clamping grids and clamp tracks on any size panel. Includes the dovetail and relief bits.

MICRODIAL Tapering Jig · $126.99
For: The furniture builder
Precision tapers accurate to 1/8 of a degree, with memory locks for repeat cuts. Made in the USA.

NEW: FitFinder Ultra Kit, 25th Anniversary Edition · $275
For: The router table enthusiast who has everything (until now)
A complete router table setup system in a Systainer: the FitFinder 1/2 Gauge and Upgrade Kit, the Fence Boss, and both Wave Glue Joint Bits. It's a limited edition celebrating 25 years of MICROJIG, and only 1,500 will ever be made.
The Ultimate Splurge

Sauter Pivoting Router Lift · $1,600
For: The serious router table owner
The German-made Sauter lift tilts from -5° to +50° and ships U.S.-ready with a Swiss-made router included. MICROJIG is the exclusive U.S. distributor, it's sold only at microjig.com, and once this run is gone there's no restock.
Still Not Sure?
A MICROJIG digital gift card lets them pick for themselves. It's delivered by email, so it's never too late, even after the December 17 shipping cutoff. You can also join our email list to get early access to holiday deals.
Happy holidays from all of us at MICROJIG. Work Safer. Work Smarter.®
Download project plans:
Used in this project.

MATCHFIT Dovetail Hardware Variety Pack

MATCHFIT Dovetail Hardware Variety Pack

MATCHFIT Pop Stop

MATCHFIT Pop Stop

GRR-RIPPER ReSaw Riser Accessory

GRR-RIPPER ReSaw Riser Accessory

GRR-RIPPER 2GO

GRR-RIPPER 2GO

GRR-RIPPER GRR-RIP ReNew Accessory

GRR-RIPPER GRR-RIP ReNew Accessory

MATCHFIT Dovetail Router Bit (1/2"-14°)

MATCHFIT Dovetail Router Bit (1/2"-14°)

FITFINDER 1/2 Gauge

FITFINDER 1/2 Gauge

FITFINDER 1/2 Gauge Upgrade Kit

FITFINDER 1/2 Gauge Upgrade Kit

ZEROPLAY Miter Bar Set

ZEROPLAY Miter Bar Set

GRR-RIPPER 100AIR 3D Pushblock

GRR-RIPPER 100AIR 3D Pushblock
%20(2).jpg)
GRR-RIPPER 200AIR 3D Pushblock
%20(2).jpg)
GRR-RIPPER 200AIR 3D Pushblock

FitFinder Wave Reversible Glue Joint Bit (Both Bits)

FitFinder Wave Reversible Glue Joint Bit (Both Bits)

MATCHFIT Dado Stop Pro

MATCHFIT Dado Stop Pro

GRR-RIPPER 300AIR 3D Pushblock

GRR-RIPPER 300AIR 3D Pushblock

BLADECLEAN Blade and Bit Cleaning System

BLADECLEAN Blade and Bit Cleaning System

MATCHFIT Grid Router Guide Kit

MATCHFIT Grid Router Guide Kit

Tapering Jig

Tapering Jig

FitFinder Ultra Kit

FitFinder Ultra Kit

Sauter Pivoting Router Lift


